Showing 1–12 of 30 results
Welcome to Nikshan: Where Elegance Meets Innovation
Explore a World of Quality Products for Every Lifestyle
Milagrow Window Seagull 23
| Brand | |
|---|---|
| Robotic Area Measurement |
Yes |
| Robotic Path Management |
Yes, 3X Better |
| Robotic Frameless Cleaning |
Yes, with Multiple Edge Sensors |
| Robotic Edge Cleaning |
Yes |
| Robotic Return to Origin |
Yes |
| Robotic Obstacle Sensing |
Yes |
| Robotic Suction Power Sensor |
Yes |
| Robotic Framed Cleaning |
Yes |
| Auto Cleaning Mode |
3 (N, Z & N+Z ) |
| Cleaning Stages |
3 stage. Wipe, Mop, Wipe |
| Glass Window Cleaning |
Yes |
| Glass Door Cleaning |
Yes |
| Plain Glass Cleaning |
Yes 2 times faster |
| Working speed |
2.5 Min/m² |
| Working noise (db) |
Working noise (db) |
| Working Time |
Unlimited as connected to mains. Battery is just a back up |
| Mopping Pad Size |
3 Mops. Wet Mop 230×190 mm |
| Extension Cord (m) |
4 |
| Remote Control Battery |
2x Aaa (1.5 Volt) Battery for Remote Control |
| Bumper Cleaning Cloth |
Yes |
| Instruction Manual |
Yes |
| Time for Full Charge |
3 h |
| Item Dimensions |
216x216x70 mm |
| Item Weight |
3.6 kg |
| Warranty |
1 Year comprehensive warranty. |
MILAGROW Seagull Agua Full Wet & Dry Robotic Vacuum Cleaner, 100ml Water Tank, 1500Pa Autoboost Suction, Gyro Mapping, Scheduling, Self Charge, 3 Cleaning Modes, APP & Remote Control (White)
MILAGROW Seagull Prime Robot Vacuum Cleaner with Remote Control, 1500Pa Autoboost Suction, Mapping, Slight Wet Mopping Without Water Tank, Scheduling, Self-Charge, 3 Cleaning Modes, APP (White)
Milagrow AguaBot 21- Floor Mopping Robot
| Brand | |
|---|---|
| Color |
Black |
| Software Generation |
Milagrow 9.01 Software Generation |
| Real-Time Path Planning |
Calculates most efficient method and route to mop & clean the floor |
| Area Cleaned Display |
Displays Cleaned and Left out area on Mobile App |
| Pressure Mopping |
5 Pascal |
| Robotic Wi-Fi Control |
Yes |
| Robotic Remote Management |
Iconic-easy to use interface enables you to manage the robot from anywhere, anytime via a Mobile Internet Device. |
| Robotic Self Diagnosis |
Yes |
| Robotic Gyro Sensor |
Yes |
| Software Upgrade |
Over the Air |
| Robotic Cloud Storage |
Yes |
| Anti Slip Tyres |
16 mm width |
| Climb Capability |
18 mm |
| Suction Power |
Japanese NIDEC Brushless motor, which has 1500Pa suction power, maximizes the cleaning power with the main brush |
| Turbo Suction |
2 modes normal, spot from 900pa to 1500pa |
| Number of Side Brushes |
Roller Cleaning System |
| Types of Cleaning |
Types of Cleaning |
| Cleaning Modes |
4 Cleaning Modes, Path, Spot, Edge and Area |
| Automatic Double Cleaning |
In Spot |
| S Shape |
Live path cleaning |
| Super/Turbo Mode |
2 modes normal, spot from 900pa to 1500pa |
| Smooth Tiles Cleaning |
Yes |
| Hard Floor Cleaning |
Yes |
| Wood Floor Cleaning |
Yes |
| Glass Floor Cleaning |
Yes |
| Marble Floor Cleaning |
Yes |
| Linoleum Floor Cleaning |
Yes |
| Slippery Tile |
Yes |
| Mobile app |
Yes |
| Time for Full Charge |
5 Hours |
| Battery Capacity |
2900 mAh |
| Input Voltage |
100-240V,50-60Hz |
| Cleaning Brush |
Main Roller + 1 Extra Roller |
| Item Weight |
4.5 kg |
| Warranty |
1 Year |
Milagrow Seagull Joy – 1500Pa Autoboost Suction Robotic Vacuum Cleaner, Slight Wet Mopping Without Water Tank, Scheduling, Mapping, Self-Charge, 3 Stage Cleaning, APP (White)
Milagrowimap 23 black plus and suction is- 4000 pa and battery – 5000 mah
| Brand | |
|---|---|
| Color |
Black |
| Software Generation |
BharatBot 0.24 RT2R Software |
| Live Map Display on Mobile |
iMap 23 Black Plus will display the real time progress and map while cleaning, on your device and remember the cleaned vs uncleaned areas and update it in real time |
| Lidar Laser Scanning Range |
12 metre with accuracy of upto 8mm |
| Real-Time Path Planning |
Calculates Ideal Path in real time to memorize and reduce time taken |
| Area Cleaned Display |
Displays Cleaned and Left Area and comes back to Clean the Left out Areas in case work is stopped midway |
| Memory Function |
No matter how many rooms are and their size. Even after battery depletion the iMap will recharge and resume from the point it left cleaning. |
| Virtual Wall |
Prevents robot from going into unwanted areas simply by demarcating the area on the mobile app. |
| Wet and Dry Cleaning |
Yes |
| Pressure Mopping |
The wet mopping is done with a pressure of 8 Newtons to remove stubborn dirt and stains |
| Robotic Wi-Fi Control |
Yes |
| Robotic Remote Management |
Iconic-easy to use interface enables you to manage the robot from anywhere, anytime via a Mobile Internet Device. |
| Robotic Self Diagnosis |
Yes |
Milagrow RP Rover Professional, Pool Robot Cleaner
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Filtering or Suction Rate |
18000 liters/Hour |
| Operating Cost per hour |
Rs. 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 4h ( Pool size less than 4000 Sq ft) , 6h (Pool Size less than 6000Sq ft) or 8h Pool Size less than 8000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Maximum 130㎡/h or 1400 Square Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. |
| Recommended Cleaning Area |
2800 Sq Ft in 2 hours. After that, just change the battery if required |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degress |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Power Box |
Water resistant |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
845.8x264x452.5 mm |
| Warranty |
1 year, not including the wearable parts and accessories & 6 months warranty for battery |
Milagrow RoboPhelps 40 Turbo- Robotic Pool Cleaners
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Filtering or Suction Rate |
40000 litres/hour |
| Operating Cost per hour |
Rs 4.5 per hour |
| Cycle Time and Timers |
You can select from 3 settings 4h ( Pool size less than 4000 Sq ft) , 6h (Pool Size less than 6000Sq ft) or 8h Pool Size less than 8000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
36N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
8 Sponge wheels – 4 front and 4 back |
| No of Drive Motors |
4 Climbing motors and 2 pump motors. |
| Cable Swivel |
360 Degress |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Power Box |
Water resistant |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
350 W |
| Item Dimensions |
845.8x264x452.5 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RP 30 Professional Swimming Pool Robotic Cleaner
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RoboPhelps 30, Pool Cleaner Robot
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RP 25 Professional- Robotic Pool Cleaners
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RP 20 Professional, Swimming Pool Cleaning Robots
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Robotic Shut off |
Shuts itself at the end of the cycle |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
