Showing all 10 results
Pristine Waters Await: Dive into Advanced Pool Cleaning Robot
Effortless Pool Maintenance for a Crystal-Clear Oasis
Milagrow RP Rover Professional, Pool Robot Cleaner
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Filtering or Suction Rate |
18000 liters/Hour |
| Operating Cost per hour |
Rs. 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 4h ( Pool size less than 4000 Sq ft) , 6h (Pool Size less than 6000Sq ft) or 8h Pool Size less than 8000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Maximum 130㎡/h or 1400 Square Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. |
| Recommended Cleaning Area |
2800 Sq Ft in 2 hours. After that, just change the battery if required |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degress |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Power Box |
Water resistant |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
845.8x264x452.5 mm |
| Warranty |
1 year, not including the wearable parts and accessories & 6 months warranty for battery |
Milagrow RoboPhelps 40 Turbo- Robotic Pool Cleaners
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Filtering or Suction Rate |
40000 litres/hour |
| Operating Cost per hour |
Rs 4.5 per hour |
| Cycle Time and Timers |
You can select from 3 settings 4h ( Pool size less than 4000 Sq ft) , 6h (Pool Size less than 6000Sq ft) or 8h Pool Size less than 8000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
36N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
8 Sponge wheels – 4 front and 4 back |
| No of Drive Motors |
4 Climbing motors and 2 pump motors. |
| Cable Swivel |
360 Degress |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Power Box |
Water resistant |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
350 W |
| Item Dimensions |
845.8x264x452.5 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RP 30 Professional Swimming Pool Robotic Cleaner
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RoboPhelps 30, Pool Cleaner Robot
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RP 25 Professional- Robotic Pool Cleaners
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
Milagrow RP 20 Professional, Swimming Pool Cleaning Robots
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Robotic Shut off |
Shuts itself at the end of the cycle |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Item Dimensions |
450x490x260 mm |
| Warranty |
1 Year not including the wearable parts and accessories |
RoboPhelps 25- Milagrow Pool Robot
Milagrow RP 15 Professional ,Pool Robot
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter the water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of the water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Robotic Shut off |
Shuts itself at the end of the cycle |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
2100 Sq Ft in 2 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 0.5h ( Pool size less than 500 Sq ft), 1h (Pool Size less than 1000 Sq ft) or (2h Pool Size greater than 1000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filters. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| No of Drive Motors |
2. They provide outstanding climbing ability |
| Cable Swivel |
360 Degrees |
| Filter Bag Location |
Bottom of the body for easy cleaning |
| Optimum Working Temperature |
10℃-32℃ |
| Power Box |
Water-resistant |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Warranty |
1 Year not including the wearable parts and accessories |
| Item Dimensions |
450x490x260 mm |
Milagrow AguaSolarion, Pool Robot
| Brand | |
|---|---|
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Work Capacity |
35000 gallons water |
| PH Range |
7.2 -7.8 |
| Chlorine Consumption |
2 to 3 parts per million |
| Plastic Box Material |
PE |
| Spring Material |
Stainless steel |
| Panels Material |
Monocrystalline silicon |
| Warranty |
1 Year |
Milagrow RoboPhelps 20, Best Robotic Pool Cleaners
| Brand | |
|---|---|
| Robotic Programming |
Smart Z programming for Systematic Cleaning |
| Robotic Balance |
Rights itself when inverted |
| Robotic Reverse |
If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
| Robotic Injury Protection |
The impeller automatically stops within 1 second if it is taken out of water while it is working |
| Robotic Self Preservation |
The impeller stops working in case some large foreign matter is obstructing it |
| Robotic Shut off |
Shuts itself at the end of the cycle |
| Above Ground or In Ground |
Above Ground and In-ground Residential and Commercial Pools |
| Surface Type |
All Types – Tile (large & small), vinyl, Gunite, Fiberglass |
| Coverage Surfaces |
Floor, Walls and Coves |
| Recommended Cleaning Area |
4200 Sq Ft in 4 hours |
| Filtering or Suction Rate |
18000 Litres/Hour |
| Operating Cost per hour |
Rs 3 per hour |
| Cycle Time and Timers |
You can select from 3 settings 1h ( Pool size less than 1000 Sq ft) , 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft) |
| Method of Movement |
Linear Jet Propulsion |
| Input Voltage |
100-240VAC, 49.3-60.5Hz |
| Wattage |
200 Watt |
| Pool Cleaning Speed |
Max 120㎡/h or 1300 Sq Ft /h |
| Ground Moving speed |
780 metres/hour or 43 ft/minute |
| Maximum Length of Pool |
40 meter |
| Pump Thrust |
17N |
| Filter Bag Porosity |
Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. |
| Repeat Spot Cleaning |
Via Remote |
| Wheel Type |
Impeller with Sponged Wheels, Abrasion Proof |
| Scrubbing |
4 Sponge wheels – 2 front and 2 back |
| Optimum Working Temperature |
10℃-32℃ |
Frequently Asked Questions About Pool Robots
Q: Do robotic pool cleaners really work?
Ans: Yes, robotic pool cleaners are highly effective. They use advanced technology to clean the pool thoroughly, including walls and floors, ensuring a spotless pool with minimal effort.
Q: How long do pool robots last?
Ans: Pool robots typically last 3-5 years with proper maintenance. Regular cleaning and storage when not in use can extend their lifespan.
Q: Will a pool robot pick up algae?
Ans: Yes, a pool robot can help pick up algae, but it’s best to treat the pool with appropriate chemicals to prevent algae growth in the first place.
Q: Can you swim with a pool robot in the pool?
Ans: No, it's not recommended to swim with a pool robot in the pool for safety reasons. Always remove the robot before swimming.
Q: Do robotic pool cleaners use a lot of electricity?
Ans: No, robotic pool cleaners are energy-efficient. They typically use less electricity compared to traditional pool pumps and filters.
Q: Do pool robots clean steps?
Ans: Some advanced pool robots can clean steps, but it's best to check the specifications of the model to ensure it meets your needs.
Q: Do I need to brush my pool if I have a robot?
Ans: While pool robots are highly effective, brushing your pool occasionally can help maintain its cleanliness, especially in hard-to-reach areas.
Q: How to choose a pool robot?
Ans: Choose a pool robot based on your pool size, type, and specific cleaning needs. Look for features like wall climbing, energy efficiency, and ease of maintenance.
Q: What are the benefits of a pool robot?
Ans: Pool robots offer convenience, energy efficiency, and thorough cleaning. They reduce manual labor, save time, and ensure a consistently clean pool.
Q: Should I leave my pool robot in the pool?
Ans: It's not recommended to leave the pool robot in the pool when not in use. Remove it after cleaning to prolong its lifespan.
Q: When should I run my pool robot?
Ans: Run your pool robot at least once a week or more frequently during heavy use periods to maintain optimal cleanliness.
Q: Do pool robots map the pool?
Ans: Some advanced pool robots come with mapping technology to ensure efficient and thorough cleaning by covering the entire pool surface.
Q: Can you use a pool robot in the rain?
Ans: It's best to avoid using a pool robot in the rain to prevent any electrical issues or potential damage to the unit.
Q: Can I use a pool robot after shocking?
Ans: Wait at least 24 hours after shocking your pool before using a pool robot to avoid any potential chemical damage to the robot.
